PDF Datasheet
Pengo® screw bits are specially designed to eliminate a dead spot at hole centre and bore clean holes through semi-consolidated clay, loam, soft shale and similar formations. Carbide faced screw bits are for consolidated rock and abrasive soil, where impact is minimal. Hardfaced bits are for abrasive, high impact conditions.
PART NO. CODE NO. SCREWBIT DIA (MM) APPROX. WT (KG) USED
WITH		 INFO REQUEST
SB-25 131740 63.5 0.4 Pengo® CS series augers
SB-25C 132135
SB-25HF 13226
SB-25CXC 132758
SB-25HFTC 132590
SB-30 131766 76.2 0.5
SB-30C 131764
SB-30HF 132359
SB-30CXC 131765
SB-30HFTC 133250
8mm x 38mm 151660 Bolt & Nut 0.05 SB-25/45
SB-35 133402 88.9 0.9 Pengo® LD series augers
SB-35C 133403
SB-35HF 133404
SB-35CXC 133405
SB-35HFTC 133406
SB-45 133407 114.3 1.4
SB-45C 133408
SB-45HF 133409
SB-45CXC 133410
SB-45HFTC 133411
9.5mm x 38mm 151671 Bolt & Nut 0.05
SB-50 131728 127 1.4 Pengo® MD & HD series augers
SB-50C 131751
SB-50HF 132937
SB-50CXC 132423
SB-50HFTC 132624
SB-60 132029 152.4 1.8
SB-60C 132803
SB-60HF 133251
SB-60CXC 133252
SB-60HFTC 133254
SB-70 132185 177.8 1.8
SB-70C 132368
SB-70HF 132960
SB-70CXC 133255
SB-70HFTC 133256
SB-80 132198 203.2 2.3
SB-80C 132638
SB-80HF 133257
SB-80CXC 133258
SB-80HFTC 133259
SB-90 132552 228.6 2.3
SB-90C 133260
SB-90HF 132898
SB-90CXC 133261
SB-90HFTC 133271
SB-100 132363 254 3.2
SB-100C 132367
SB-100HF 132747
SB-100CXC 133262
SB-100HFTC 133272
FH-205 157382 127 1.4 Pengo® MD & HD series augers
FH-205C 132260
FH-205HF 131725
FH-205CXC 132825
FH-205HFTC 133264
9.5mm x 38mm 51670 Bolt & Nut 0.05 SB-50/100
Screw Bits - Carbide Drill Heads - Drivlugs & Drive Pins - Alt. Pilot Bits & Adapters - MD Boring Heads & Shank Plates